ADT Security Services BHS-3000C User Manual download pdf (Page 33)

Testing the Smoke Detector

The smoke detector can be tested without sending an alarm signal to ADT. Call ADT Customer Care at

800.445.0872 for assistance. Do not attempt to test the smoke detector with heat, flame or canned smoke, as

these methods can damage the smoke detector.

Testing the Doors and Windows Only

This test identifies whether the sensors on your home’s protected doors and windows are operating properly. You

may prefer to conduct this test if you find it distracting to hear the siren blast each time you pass the motion detector

while testing the system. No alarm signals are sent to ADT’s Customer Monitoring Centers.

To test the system’s door and window sensors, follow the instructions on the next page.

Note: If the system’s chime feature is on, skip steps 2, 3 and 4 of the Standard keypad instructions or steps 2 and 3

of the Premium keypad instructions. When the chime feature is on, the keypad beeps if a protected door or window is

opened while the system is off.

7. If you do not hear the

siren blast, call ADT at

800.445.0872.

8. When you have finished,

press the CANCEL key.

6. If you do not hear the

siren blast, call ADT at

800.445.0872.

7. When you have finished,

press the CANCEL key.

Standard Keypad

Premium Keypad

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 61 62

No comments

ADT Security Services BHS-3000C User Manual Page 33